TECHNICAL INFORMATION



Click on the links below for technical information on the products in the F10 range

F10 Cleaning Products

For further information please look at the website of the manufacturers, Health and Hygiene, in South Africa

A summary of the uses of each product is available here


F10 CLEANING PRODUCTS:

F919SC Degreaser/Cleanser

Developed and Manufactured by:
Health and Hygiene (Pty)Ltd
P.O.Box 347
Sunninghill
2157
South Africa


Performance of F919SC

* F919SC is a heavy duty cleanser with a emulsifying action for removing heavy soiling, protein, fat and natural oil deposits from hard surfaces safely.
* F919SC is an alkaline compound incorporating a wetting agent for effective coverage and a soil suspension agent to facilitate easy removal.
* F919SC can be safely applied as a wash or by using a spray or high pressure equipment.
* F919SC is a low foaming product making it ideal for use in CIP systems or crate washes.
* F919SC is effective in hot or cold water.
* F919SC is economical as only low concentrations are needed.
* 1:200 - 1:50 (for most cost effective dilutions hot water is recommended).
* For best results clear away debris and rinse, with preferably hot water in fatty conditions, before applying F919SC.


Tested and approvals

* F919SC Complies with SABS Specification 1344 for cleaning effectiveness, free rinsing, non corrosiveness and water insoluble matter content.
* F919SC Complies with the SABS Specification 1330 for Dermal irritation.

Carries the SABS Mark 1828. Chemicals for use in the Food Industry.

* SABS refers to South African Bureau of Standards


Material Safety Data Sheet

Product identification
Trade Name:

* F919SC Degreaser/Cleanser

Product Use:
* Hard surface degreaser/cleanser

Chemical type:
* Alkaline heavy duty degreaser/cleanser

Suppliers identification
Name:
Health and Hygiene (Pty)Ltd
Address: P.O.Box 347, Sunninghill, 2157, South Africa
Telephone No: 011 474 1668
Fax No: 011 474 1670

Hazardous ingredients
Hazardous Ingredients: None

Percentage of weight: N/A

LD50 of Material: > 2500 mg/kg

Physical data

Physical State: Liquid

Appearance and Colour: Light honey colour

Evaporation Rate: As Water

Boiling Point: 110° C

Freezing point: -20° C

% Volatile (by weight): NIL

Solubility in water (20° C): Soluble

pH: 12 approximately

Specific gravity: 1.02 @ 20° C

Fire and explosion data
Flammability: Non-Flammable

If Yes, Under Which Conditions: None

Reactivity data

Chemical Stability: Stable

Incompatibility: If mixed with anionic soaps or strong agents

Hazardous Decomposition Products: If burnt may produce irritating fumes

Toxocological properties
Exposure Route
Degree of Hazard
Skin Contact
Moderate: Will act as skin degreasant
Eye Contact
Moderate: Will cause some initial conjunctivitis which after rinsing will slowly disappear
Inhalation Acute
Low: No significant hazard
Inhalation Chronic
Low: No significant hazard
Ingestion
Moderate: Will cause some inflammation of the mouth or throat tissues if swallowed undiluted

Preventative measures
Personal Protective Equipment: Not required


Eye Protection: Avoid contact with eyes

Leak & Spill Procedure: Soak up onto inert material or may be flushed to drain with copious amounts of water

Handling Procedures: Ensure good industrial hygiene

Storage Requirements: Store between 0° - 30° C in dry conditions

First aid measures
Inhalation: Non-toxic: avoid long term inhalation of neat liquid. Remove to fresh air

Eye Contact: Rinse eyes with water. Seek medical advice if necessary

Skin Contact: Wash affected area with soap and water

Ingestion: DO NOT induce vomiting. Give milk, or water to drink. Seek medical advice where necessary.